Pre-disinfectant Aniosyme X3 | Anios
Designed to meet the needs of healthcare professionals, Aniosyme X3 Pre-Disinfectant is a high-performance detergent. It provides intensive cleaning and optimal pre-disinfection of medical-surgical instruments, including endoscopic equipment. This solution is compatible with soaking methods and ultrasonic tanks, guaranteeing effectiveness in a variety of medical environments.
Its advanced formula is based on the combination of three enzymes (Protease, Lipase, Amylase), capable of efficiently breaking down proteins, fats and starches. This triple enzymatic action ensures exceptional detergency, complemented by surfactants for effective removal of complex soiling encountered in medical environments.
In terms of antimicrobial efficacy, Aniosyme X3, diluted to 0.5%, acts in just 5 minutes to reduce the population of Pseudomonas aeruginosa by over 5 logs and reduce residual proteins by 84%, including in biofilms.
Offering enhanced safety for patients and ease of use for professionals, this product is an essential choice for optimal hygienic management of medical devices.
ATTENTION : Promotion date short on reference ZA003. Expiration end 06/2025. Price includes promotion.
- First enzymatic liquid detergent with disinfectant properties.
- Tri-enzymatic complex: protease, lipase, amylase, combined with surfactants.
- Proven efficacy (PND = Cleaning Degreasing Power)
- Formulated without chlorine: no oxidation of materials.
- Formulated without aldehyde: no protein fixation.
- Soaking bath stability: 8 hours (operating day)
- Proven enzymatic stability.
- Neutral pH: compatible with aluminum alloys.
- Formulated without chloride (product based on ammonium propionate): anticorrosive effect on materials.
- Compatible with ultrasound.
- Clear blue liquid with fragrance.
Ingredients :
Quaternary ammonium propionate, polyhexamethylene biguanide hydrochloride, enzyme complex (protease, lipase and amylase), surfactants, stabilizers, sequestrant, fragrance, colorant.
Directions for use:
- 0.5% dilution: Pour a 25 ml dose into 5 liters of cold or lukewarm water.
- Completely immerse the medical device. Recommended minimum soaking time: 5 min. For endoscopic equipment: Double clean for 10 + 5 minutes, then swab.
- Rinse medical device thoroughly with mains water (of good microbiological quality). For endoscopic equipment: outside and inside the medical device.
- Wipe with a clean drape. Proceed to the next step (see internal protocol).
ATTENTION :
Aniosyme X3 Pre-disinfectant cleaner in 5-liter containers (ZA002) is sold WITHOUT THE ZA002P PUMP!
Please note that reference ZA003 is sold in packs of 50 single-dose sachets of Aniosyme X3 solution.